Silicone tube production process and production technology

The use of advanced scientific production technology, high-quality precision silicone tube is the use of imported silicone raw materials, the use of intermittent method for the production of raw rubber, vertical extrusion equipment for extrusion, for the gas phase rubber of high tear resistance and high transparency, mixing rubber of ultra-high and the lower the hardness of the functional mixing rubber and other characteristics of the production of silicone tubes, the product adaptability, wide range of uses.

Silicone rubber is a new type of polymer elastic material, has excellent resistance to high temperature (250-300 ℃) and low temperature (-40-60 ℃) performance, has a good physiological stability, and can withstand repeated harsh and sterilization conditions, with excellent resilience and permanent deformation of small (200 ℃ for 48 hours is not greater than 50%), breakdown voltage (20-25KV/mm), ozone resistance, UV resistance. The special silicone rubber has excellent resilience and small permanent deformation (more than 50% at 200℃), breakdown voltage (20-25KV/mm), ozone resistance, UV resistance. Radiation resistance and other characteristics, special silicone rubber with oil resistance. Widely used in food drinking, infusion, electronic equipment, water dispensers, coffee machines, water heaters, medical medical industry and other fields.

Silicone tube production is actually a technology, the technicians and production staff also have to have certain requirements, so this production process is to be quite professional, generally by more than 2-3 years of experience in the extrusion and refining of the master, the quality will be a little better. Below we briefly introduce the silicone tube production process and production process:

Silicone tube production process and production technology

Silicone tube in the end what is the production process and production technology?

First, silica gel refining – drying – extrusion – quality control – high temperature treatment – sterilization treatment – cutting or processing – again quality control – packaging

Second, the specific process is that the master refiner will be raw materials raw silicone into the refiner for a certain period of time mixing, and then according to the production requirements to add silicone vulcanizing agent mixing uniformity after the strip, and then a strip into the vertical extruder, from the fixed specifications of the mold inside the extrusion, can be extruded from the top to the bottom, you can also be parallel extrusion through the oven vulcanization, high-temperature disinfection, and then two-stage sulfurization, sulfurization, and wait for the cold shrinkage, and then the quality inspection! After inspection, the tube will be sent to the processing department for packaging.

If you have other questions about silicone tube, you can log on the official website of Srtub (www.srtub.com), where the most authoritative silicone tube technicians for you to professionally answer a variety of related questions.

WhatsApp/Wechat: +86 13075286997

Email: sales@srtub.com